Cruiser Headlamp M780

The Beontag Cruiser Headlamp RFID tag is an advanced and non-transferable solution designed to be applied to vehicle headlamps and windshields. This tag offers tamper-proof protection, ensuring the security and integrity of information.

Electrical Specifications:

• Device Type: UHF RFID / EPCglobal Gen2v2
• Operational Frequency: Global 865-928MHz
• IC Type: Impinj M780
• Memory Configuration: EPC 496 bit; User 128 bit; TID 96 bit
• EPC Memory Content: Unique random 96-bit EPC in every label
• Read Range: ETSI up to 13m/43ft, FCC up to 18m/59ft
• Applicable Surface Materials: Glass

Mechanical Specifications:

• Tag Materials:
  • Back Side (facing windshield): Aluminum antenna with acrylic adhesive
  • Front Side (facing driver): Inkjet and thermal printable transparent PET. Resin ribbon recommended.
• Weight: <1 g
• Tag Dimensions: 90 x 11.5 x 0.2 mm / 3.54 x 0.45 x 0.01 in

Environmental Resistance:

• Operating Temperature: -35°C to +85°C / -31°F to +185°F
• Storage Conditions: 1 year at +20°C / 50% RH (shelf life for adhesive)
• Expected Lifetime: Years under normal operating conditions
• Chemical Resistance: No physical or performance changes in:
  • Exposure to salt water (salinity 10%) for 168 hours
  • Exposure to NaOH (10%, pH 13) for 24 hours
  • Exposure to motor oil for 168 hours
  • Exposure to sulfuric acid (10%, pH 2) for 168 hours
  • Exposure to windshield washing fluid for 168 hours
  • Exposure to antifreeze for 168 hours
  • Exposure to car shampoo for 168 hours
  • Exposure to gasoline for 168 hours
  • Small exposure to car wax

Installation Instructions:

• Ideal Installation Conditions: +20°C (+68°F) / 50% RH.
• Adhesion: The label adhesive will provide maximum adhesion within 24 hours after installation. Bond strength can be improved with firm application pressure.
• Surface Cleaning: Always clean and dry the surface to obtain maximum bond strength. Avoid touching the background adhesive.
• Contact with Metal: The label antenna parts should not be in contact with metal to ensure the best performance of the label.
• Minimum Bending Diameter: 50mm. Do not bend the label below this limit.
• IC Chip Sensitivity: Do not touch the location of the IC chip. The IC chip is a sensitive electrical component and can be damaged if unexpected pressure is applied to the chip.